| Wanted |
Parts for a 1926 2-dr Sedan with a Continental 18L motor. Distributor with cap & rotor, carburetor, hydraulic wheel cylinders. Steering wheel, front seats, interior door and window crank handles. 8/07
Bob Andersen
andersenbob@hotmail.com
250-836-4066 (Summer Can.)
928-341-9311 (Winter AZ)
250-828-2073 (Spring & Fall Canada)
|
| |
| Wanted |
Tail light lens for a 1924 De Luxe Touring, rectangle in size, 6” x 3-3/8,” with a checkered design on one side and smooth on the other.
The pre-heat crossover pipe that goes from the exhaust manifold, over the head, to the Rayfield carburetor. 1923 and 24’ (perhaps 1922) are the same
Don Hunter
dondonna@telus.net
250-287-4371 (Canada)
|
| |
| Wanted |
Trunk rack for a 1923-24 Special/De Luxe Sedan, Touring or Brougham. Prefer buying outright or borrow so that I can have it replicated. Please call or email with any questions or leads. Thanks! 9/07
Calvin F. Jewett
cfjmaj@centurytel.net
989-672-2048 (Michigan)
|
| |
| Wanted |
A circa 1920’s, two-piece, cast aluminum golf bag mount set.
The circular tray-type canted base mounts on the running board and the top cradle bracket attaches to either the fender or to the side of the body (two types).
Used to hold a golf bag with clubs to the side of a car.
Want to buy outright or borrow so that I can have them copied. 8/07
The in-gas-tank gauge and float for a 1922-24 gas tank. 9/09
The exhaust diverter box for the rear floor heater from any year sedan. 9/09
Doug Thamert
dtcollector@yahoo.com
520-444-7134 (Arizona)
|
| |
| Wanted |
Parts for a 1924 Speedster project. Remy Generator, one double bar bumper set with brackets, complete square-type rear tail lamp and license plate bar with mounting bracket.
SPEEDSTER BODY similar in design to the Paige Daytona or Kissel Goldbug. 8/07
Bob Bartosch
barto003@umn.edu
612-625-9446(w)
507-446-0226(h) (Minnesota)
|
| |
| Wanted |
I need one pair of Top Bow Saddles for my 1925 Touring. 1922 thru 1925 are likely all the same design. Also a horn button. 10/07
Doug Elliot
dougdi@hotmail.com
715-723-4295 (WI)
|
| |
| Wanted |
Hood, disc wheels and any misc. small parts, for a 1926 Jewett 6-40 or 1927 Paige 6-45 with a 109" WB chassis. 08/08
Mike Martin
msmldm@hotmail.com
530-367-2131 (California, USA)
|
| |
| Wanted |
Atwater Kent, type LA distributor or distributor shaft for a Jewett motor. 1923’, 24’ and 25’ distributor will all work. 01/09
Call or email me
Tom Barkei
barwood@charter.net
828-712-1317 (North Carolina, USA)
|
| |
| Wanted |
Round, one piece tail lamp lens that fits behind the bezel with the divisional bar through the center. 01/09
Call or email me
Robin Lewis
quality.tyres@xtra.co.nz
011-083-696-3835 (w)
011-027-482-1245 (m) (Geraldine, South Island, NZ)
|
| |
| Wanted |
I’m in desperate need of the rear U-joint and the rear-end yoke for my 1926 sedan. Also, a Model H-587 carburetor made by Johnson Company of Detroit, Michigan. 09/09
Roger Nelson
nelson@fmctc.com
712-243-1822 or 402-669-2822 (Iowa, USA)
|
| |
| Wanted |
For a 1925 or 26 De Luxe car, one pair of cowl lamps, an ER Lab horn, one hubcap and a pair of foot rail brackets. 10/10/09
Jim Schults
wilktool@pacbell.net
951-736-3115 (CA)
|
| |
| Wanted |
I own a 1924 converted Touring Car that was used in the past, in New England, as a Fire Chemical Tank or Hose Reel truck. Except for the rear side panels all of the fire related apparatus has been removed including the side rails, siren and running board spot lights. I would appreciate knowing anyone who might have a picture of this type of vehicle and or a source for any used equipment mounted on a truck of this type. (See pictures of this truck on this web site in the Photo Gallery under Project Cars) 11/09
Jack Lindsay
jumpinjackflashii@lyahoo.com
518-636-3411 (NY)
|
| |
| For Sale |
1925, 55hp Jewett motor with the carburetor on the psgr side. Spare transmission, some rear end parts. Call me to discuss these. 8/07
Don Hunter
dondonna@telus.net
250-287-4371 (Canada)
|
| |
| For Sale |
1922 Standard Touring 
Chassis # 20968, Motor # 20826. Third oldest known car to date, restored, new upholstery, 7-coats black lacquer, have top sockets but no bows or topping. Original booklets & brochures.. Picture in Photo Gallery on this web site. Car in Greeley, CO $12,500 obo. 09/07
Registered and pictured in the Official Jewett 'Six Registry www.jewettsix.com
James Griess
Winter in AZ 623-214-2979
Summer in CO 970-352-7447
|
| |
| For Sale |
REPRODUCTION PARTS - AT LAST
Click here for more information.
Please contact:
T. Jack Carpenter
1638 Emmaus Walk
Conover, North Carolina 28613 USA
Telephone: 828-464-6671
nelsoncarpenter@charter.net
|
| |
| For Sale |
1923 Standard Touring
Older restoration, 25 K miles. Retrofit carburetor and air cleaner, musical horns, spotlight, mirrors, top bow rests, bumpers, tool box, vacuum wiper. Complete & ready to drive or tour. $25,000 obo. 11/08
Registered and pictured in the Official Jewett 'Six Registry www.jewettsix.com
Raymond Leon
P.O. Box 375
Jewett, Ohio 43986
USA
740-946-0031 (h)
740-946-0104 (w)
resorationsource@yahoo.com
|
| |
| For Sale |
JEWETT ´SIX´ PARTS FOR SALE 02/09
1923´ (Some of the below might fit 1922 and 24´ model years as well)
Radiator shell: Non nickled model with surface rust, no dents.Includes original radiator which has repaired areas, but good for bottom and top tanks. Otherwise, the shell is in good and restorable condition. $40 US
Right hand Touring/Roadster front door skin with latching and part of a broken handle (extra handle included) $40 US
Transmission no rust and looks to be in good condition. (Locking security plunger is missing from shifting mechanism, otherwise complete) $150 US
Crankshaft $50 US
Camshaft $20 US
Cylinder head $40 US
Water pump housing $20 US
Steel pitman arm cover for running board $15 US
Headlamp stanchions, both right & left $20 pr, US
Coil mounting bracket $5 US
Two brass cylinder priming cocks $5 pr US
Brake and clutch arms complete with pedals $30 pr US
Rear axle assembly complete and in good condition, no braking parts included $300 US
Jewett parts for unknown years of manufacture:
Radiator shell free of dents, nickel plated but requires re-plating, highly restorable condition $40 US
Tail lamp or cowl lamp lens clear glass looks like a small rimless jar $10 US
Please contact if you have any questions or to discuss shipping
Eric Wilberg
eriphyl@shaw.ca
403-346-2755 (Alberta, Canada)
|
| |
| For Sale |
Professional 8-1/2" x 11" Glossy prints, at reasonable prices and shipping, of various Jewett & Paige cars from an old ad agency collection now belonging to:
Steve Nilles
24146 Primrose Circle
Plainfield, IL 60585
lawnmowerman224@comcast.net
View on eBay, Seller name: lawnmowerman224
|
| |
| For Sale |
1923 Parts: Motor, clutch, transmission, hood, front fender, door for Touring car.
Unfortunately there no exterior motor parts such as starter, generator, water pump or carburetor.
These parts have been in the weather but they should be usable after the rust is addressed.
Request the pictures I sent to Doug Thamert, Registrar. Make offer. 8/09
John Carlin
elaine2@rvtc.net
712-859-3635 (Iowa – USA)
|
| |
| For Sale |
1924 Standard Sedan with 13,089 original miles
Remarkably original and complete throughout with all good wood and no rust, and has been stored indoors. Previous owner (older fella) painted the exterior with Rustoleum so as to protect it until he got around to restoring it (!?) With the exception of the carpet and a few minor repairs the original upholstery is complete and can be cleaned and used as is. The motor is complete and turns over. Has good wood-spoked wheels, original jack but is missing the radiator cap/Moto-Meter. In preparation for restoration the wooden window garnish moldings have been removed and placed in a box, as are the headlamps, the visor, the tail lamp and rear tire mount. $6000.00 (US) or close. 3/10
Registered and pictured in the Official Jewett 'Six Registry www.jewettsix.com
Rich Does
Nazareth, PA USA
610-759-6766 (Pennsylvania - USA)
doesfamily@verizon.net
|
| |
| For Sale |
Original honey-comb radiator and shell with Jewett name plate for 1922 through first series 1925 cars. Good restorable condition. $250.00 (US) obo. 3/10
Rich Does
Nazareth, PA USA
610-759-6766 (Pennsylvania - USA)
doesfamily@verizon.net
|
| |
| For Sale |
1923 Special Touring car complete, disassembled and stored indoors in boxes (except the frame). Restoration work has been completed on the rear axle assembly and wheels. New timing gears. Five NOS tires. Wood is in good shape and some upholstery is available for patterns. Normal surface rust on the body. Chassis # 51014, Motor # 51159. A parts car with spare chassis, motor and some body parts is also included in the package. All is stored in a dry climate in rural Nevada for 40+ years. Asking $5000.00 obo. 05/10
Gary Jesch
Carson City, NV USA
775-831-7451 (cell, Nevada - USA)
gary@chops.com
|
| |
| For Sale |
1922 Jewett Roadster
An exceptional opportunity to own the only known '22 Jewett Roadster outside of New Zealand (One other in NZ). This was the first year the Paige-Detroit Motor Car Company produced cars. I've owned this car since 1977 and only drove 1200 miles since completely restoring it in 1979. A strong driver with the original 6 cylinder Jewett 50hp motor fitted with a non-invasive overdrive, on it's own drive shaft, so that it will do the speed limit (The original drive shaft comes with the car). The other exceptions to it's originality are the '23 Jewett disc wheels that carry the same size tire as on '22 (31x4) wheels (The original wood-spoked wheels were incomplete and beyond repair) The original distributor was replaced with a late 40's Chrysler distributor (The original Atwater Kent LA distrib comes with the car). Side curtains, an original Owners Manual and related data items, as well as many extra parts, come with the car. This car is located 260 miles North of the Montana US border. Asking $23,000 Canadian dollars or a close reasonable offer. 05/10
Registered and pictured in the Official Jewett 'Six Registry www.jewettsix.com
Eric Wilberg
Red Deer, Alberta Canada
403-346-2755 (Alberta Canada)
eriphyl@shaw.ca
|
| |
| For Sale |
1925 or '26 Radiator shell (no radiator) with a good Jewett enamel badge, acceptable surface rust, from the barn of former Montana Governor Tim Babcock. Asking $150.00. 5/10
Barry Barker
Santa Monica, California
310-804-9889 (California - USA)
barry@barkerandsonelec.com
|
